1.16 RB Tony Hunt Phily
 

Yes, call me an unabashed homer. I know it's too high for him here, but I'm not sure he'll last til my next pick. All it takes is one other nut between now and 2.4 (or a Philly homer) to screw up my plan and wait for him. It seems whenever I've tried to wait on a PSU player (eg, Michael Robinson) someone snaps him up in front of me, so I'll reach here. The last time I felt I was reaching for an RB (Gore) it didn't work out so bad, so we'll see if I can do it again.

Proceed to flame away in Bryant Johnson fashion.

Re: 1.16 RB Tony Hunt Phily
 

Very good choice/logic since he would have gone at 1.18.

Re: 1.16 RB Tony Hunt Phily
 

That's what I figured. Thanks for confirming.

Re: 1.16 RB Tony Hunt Phily
 

Of course, I set aside 5 picks before I left work and four of them are now gone. I am going to have to check my board tomorrow before making my selection. I will post this in the commentary as well. The draft will resume tomorrow by 8am EST (I apologize for the delay but I am not totally sold on anyone and want to refer to my materials (which are all at the office).

Re: 1.16 RB Tony Hunt Phily
 

AARGHHHHH! You have a west coaster and Smitty in Great Britain after you. Timezones are gonna be a nightmare tommorrow.

Just trade the pick to me... lets talk... SERIOUSLY!

Re: 1.16 RB Tony Hunt Phily
 

I don't get it. If you set aside 5 picks and 4 of them were taken, that seems to me that the decision would be easy. 5-4=1 pick left.

Re: 1.16 RB Tony Hunt Phily
 

BULLY

;)

Re: 1.16 RB Tony Hunt Phily
 

Your right the math seemed simple enough. The issue was that the last pick left was also the last on the list so I wanted to do some further evaluation. However, with everyone upset about having to wait a few hours I figured I would see if I could keep things moving.